1. Click Change Tool in Axis Control.
2. Loosen the screw with a Hex Screwdriver.
3. When attaching the module to the machine, make sure the pins are in front of the holes prior to pushing the module down.
4. Make sure the pins on the connector are not damaged, and you are able to lower it all the way down.
5. Tighten the screw.
6. Click Online in Axis Control.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article