Summa Cutter Control - Send File Using SCC5

Below a short description how to send a file (in most cases a *.PLT or *.summa1) to a cutter by using the Summa software Summa Cutter Control 5.

The procedure assumes following:

• Software - drivers are already installed (https://www.summa.eu/en/vinyl-cutter-downloads )
• Connection with the machine has been setup (https://www.summa.eu/pdf/user-manuals/sct_en.pdf)
• When material needs to be loaded it is loaded in a correct way 
• ...

To cut a file using Summa Cutter Control 5 proceed as follows:

Select "Actions" menu (1)

Select "Cut File" (2)

A browser window will open to select you file. Press Open to send the file to the cutter.