Tool Number | Tool Name | Part number | Binary code |
0 | Pen | - | 000000 |
1 | Drag Knife | - | 000001 |
2 | Pouncer (not used on F Series - wrong detection of tool) | 000010 | |
3 | Tool 3 - wrong detection of tool | 000011 | |
4..9 | Reserved | - | - |
10 | Any cut tool detected on the machine | - | 001010 |
11..13 | Reserved | - | |
14 | Camera | - | 001110 |
15 | Pointer | - | 001111 |
16..18 | Reserved | - | - |
19 | Single Edge Cutout Tool | 500-9321 | 010011 |
20 | Kiss Cutting Tool | 500-9311 | 010100 |
21 | Creasing Tool D25 R1.5 W1.5 H1.5 | 500-9327 | 010101 |
22 | EOT - Electric Oscillating Knife | 500-9320 | 010110 |
23 | POT | 500-9350 | 010111 |
24 | RM - Rotary module | 500-9360 | 001100 |
25 | Double Edge Cutout Tool | 500-9313 | 011001 |
26 | Heavy Duty Tool | 500-9314 | 011010 |
27..28 | Reserved | - | - |
30 | Creasing Tool 2 D25 R1.5 W8 H5.5 | 500-9326 | 011110 |
31 | Creasing Tool 3 D25 R3 W8 H7 | 500-9325 | 011111 |
32 | V-Cut 45 | 500-9344 | 100000 |
33 | V-Cut 30 | 500-9343 | 100001 |
34 | V-Cut 22.5 | 500-9342 | 100010 |
35 | V-Cut 15 | 500-9342 | 100011 |
36 | V-Cut 0 | 500-9340 | 100100 |
37 | Router (HF or Standard) | - | no barcode |
38 | Creasing Tool 4 D15 R0.35 H1 - 2pt | 500-9328 | 100110 |
39 | Creasing Tool 5 D15 R0.18 H1.5 - 1pt | 500-9329 | 100111 |
40 | POT-L | 500-9358 | 101000 |
41 | HTRM - High Torque Rotary Module | 500-9361 | 101001 |
42 | Reserved | 101010 |
When a barcode sticker is damaged, a faulty number is sometimes displayed in Summa Axis Control:
The first thick line is the start of the barcode, followed by 6 small lines, giving the tool a binary code.
Binary | Decimal | Tool |
011111 | 31 | Barcode Sticker Tool 31 (Crease Tool D25 R3 W8 H7) |
010111 | 23 | Barcode Sticker Tool 23 (POT) |
100110 | 38 | Barcode Sticker Tool 38 (Creasing wheel 4: D15 2pt) |
For example, if a POT is recognized as a Kiss Cut tool, this could mean two of the silver lines have not been detected well by the sensor. Cleaning the sliver lines could help. If it doesn't than replacing the sticker or making the Barcode sensor calibration could help.
Tool description | Tool Number | Binary code | Barcode sticker |
Kiss Cutting Tool | 20 | 010100 | |
POT | 23 | 010111 |
Part number for a set of barcode stickers: 500-9117
Click the following link if the machine is not recognizing tools: Tool Not Recognized
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article