S Class 2 - Driver Installation - GoSign and WinPlot

Modified on Wed, 31 Jul at 5:36 PM

This document describes how to install the software necessary to drive an S Class 2 series roll-cutter, and applies to the following models:

S2D75
S2T75
S2D120
S2T120
S2D140
S2T140
S2D160
S2T160

In case of problems getting the machine up and running, it is best to contact your machine vendor as they can determine whether there is a configuration or technical issue.

Attachments (1)

pdf

Driver insta....pdf
1.01 MB